background image

ENGLISH

COMBO130 - Mixer/Amplifier with tuner and USB player for 100V line

2

1 - Please read carefully :

We strongly recommend to read carefully and understand the safety instructions before 
attempting to operate this unit.

2 - Please keep this manual :

We strongly recommend to keep this manual with the unit for future reference.

3 - Operate carefully this product :

We strongly recommend to take into consideration every safety instruction.

4 - Follow the instructions:

Please carefully follow each safety instruction to avoid any physical harm or property 
damage.

5 - Avoid water and wet locations :

Do not use this product in rain, or near washbasins or other wet locations.

6 - Installation :

We strongly encourage you to only use a fixation system or support recommended 
by the manufacturer or supplied with this product. Carefully follow the installation 
instructions and use the adequate tools.
Always ensure this unit is firmly fixed to avoid vibration and slipping while operating 
as it may result in physical injury.

7 - Ceiling or wall installation :

Please contact your local dealer before attempting any ceiling or wall installation.

8 - Ventilation :

The cooling vents ensure a safe use of this product, and avoid any overheating risk.
Do not obstruct or cover these vents as it may result in overheating and potential 
physical injury or product damage. This product should never been operated in a 
closed non-ventilated area such as a flight case or a rack, unless cooling vents are 
provided for the purpose .

9 - Heat exposure :

Sustained contact or proximity with warm surfaces may cause overheating and product 
damages. Please keep this product away from any heat source such as a heaters, 
amplifiers, hot plates, etc...

Sound levels

Our audio solutions deliver important sound pressure levels 
(SPL) that can be harmful to human health when exposed 
during long periods. Please do not stay in close proximity of 
operating speakers.

1 - Safety information

Important safety information

Symbols used

Any maintenance procedure must be performed by a CONTEST 
authorised technical service. Basic cleaning operations must tho-
roughly follow our safety instructions.

This product contains non-isolated electrical components. Do not 
undertake any maintenance operation when it is switched on as 
it may result in electric shock.

This unit is intended for indoor use only. Do not use it in a wet, 
or extremely cold/hot locations. Failure to follow these safety ins-
tructions could result in fire, electric shock, injury, or damage to 
this product or other property.

WARNING

 :

 

This unit contains no user-serviceable parts. Do not open the housing or attempt 

any maintenance by yourself. In the unlikely even your unit may require service, please contact your 
nearest dealer.
In order to avoid any electrical malfunction, please do not use any multi-socket, power cord extension 
or connecting system without making sure they are perfectly isolated and present no defect.

10 - Electric power supply :

This product can only be operated according to a very specific voltage. These 
information are specified on the label located at the rear of the product.

11 - Power cords protection:

Power-supply cords should be routed so that they are not likely to be walked on or 
pinched by items placed upon or against them, paying particular attention to cords at 
lugs, convenience receptacles and the point where they exit from the fixture.

12 - Cleaning precautions :

Unplug the product before attempting any cleaning operation. This product should be 
cleaned only with accessories recommended by the manufacturer. Use a damp cloth 
to clean the surface. Do not  wash this product.

13 - Long periods of non use :

Disconnect the unit’s main power during long periods of non use.

14 - Liquids or objects penetration :

Do not let any object penetrate this product as it may result in electric shock or fire.
Never spill any liquid on this product as it may infiltrate the electronic components 
and result in electric shock or fire.

15 - This product should be serviced when :

Please contact the qualified service personnel if :

- The power cord or the plug has been damaged.
- Objects have fallen or liquid has been spilled into the  appliance.
- The appliance has been exposed to rain or water.
- The product does not appear to operate normally.
- The product has been damaged.

16 - Inspection/maintenance :

Please do not attempt any inspection or maintenance by yourself. Refer all servicing 
to qualified personnel.

17 - Operating environment :

Ambient temperature and humidity: +5 - +35°C, relative humidity must be less than 
85% (when cooling vents are not obstructed).
Do not operate this product in a non-ventilated, very humid or warm place.

Recycling your device

• As HITMUSIC is really involved in the environmental cause, 
we only commercialise clean, ROHS compliant products.
• When this product reaches its end of life, take it to 
a collection point designated by local authorities. The 
separate collection and recycling of your product at the time 
of disposal will help conserve natural resources and ensure 
that it is recycled in a manner that protects human health 
and the environment.

This symbol signals an important safety precaution.

The CAUTION symbol signals a risk of product deterioration.

The WARNING symbol signals a risk to the user’s physical integrity.
The product may also be damaged.

Instructions and recommendations

Summary of Contents for COMBO 130











Reviews: