HALCRO SSP100
System configuration for Setup
System configuration after setup
Please note that all DVD players do not have active composite outputs when the HDMI
output is switched on.
To use the SSP100 for HDMI switching only use the setup below for source input 1
(assuming the DVD is connected to SRC1 and HDMI 1. HDMI and component video will be
bypassed and the DVD will feed the display direct.
DVD Player
HDMI O/P
Composite
O/P
SSP100
HDMI 1 I/P HDMI
O/P
Composite I/P 1
Composite
Mon+OSD O/P
Set to SRC 1
Monitor
Composite I/P
(for OSD)
DISPLAY
HDMI I/P
Select HDMI
input
DVD Player
HDMI O/P
Composite
O/P
SSP100
HDMI 1 I/P HDMI
O/P
Composite I/P
1
Composite
Mon+OSD O/P
Set to SRC 1
DISPLAY
HDMI I/P
Composite I/P
Press STATUS to
see OSD on main
display
