ENGLISH
AUDIOPHONY PUBLIC ADDRESS
5
4.4 - Rear panel
[1] Fuse
If need to change the fuse, please replace it by a model
with the exact same characteristics.
[2] Power cord
Connect this cable to a standard electrical outlet (16 A -
230 V).
[3] Mic 2 and 3 inputs
These unbalanced Jack 6.35 inputs allow you to use
dynamic microphones. The volume can be controlled via
the front panel.
[4] Aux 1 and 2 inputs
These RCA unbalanced stereo inputs allow you to
connect line-level -10 dB sources.
[5] Line-level output
This RCA unbalanced output allows you to connect sound
diffusion or recording systems. The output level is -10 dB.
[6] Loudspeakers output terminal
Connect here your sound system, depending on its type.
The black terminal represents the com.
The red terminal must be used according to your sound
system:
- 4 to 16 Ohms for a speaker set with a total impedance
included between 4 and 16 Ohms
- 70 V for a PA system of 70V (max 130 W)
- 110 V for a PA system of 70V (max 130 W)
Warning: Dangerous output voltage (100V ).
Please only use cables compliant with the
current laws and safety regulations.
[7] Mute button
Allows you to configure the mute level. The max value is
-30 dB.
[8] AM antenna
Connect your AM antenna here. The system cannot detect
any signal without antenna.
[9] FM antenna
Connect your FM antenna here. The system cannot detect
any signal without antenna.
1
8
9
2
7
5
3
4
6