ATOM series -
2 ways 10/12/15" powered full range speaker and 15/18" powered subwoofer with DSP
Page 8
MENUS
MENU OPTIONS
LEVEL menu
This menu appears when the subwoofer is initialized and allows
you to adjust the subwooer's amplification level.
It is not necessary to press the button to make this setting.
The value varies from MUTE (no amplification) to +10dB.
NORMAL
NORMAL
150 Hz
NONE
0 dB
ATOM15ASUB
MODE menu
This menu allows you to choose the behavior of the cabinet
according to how it is positioned.
-
NORMAL
: Choose this option when using the cabinet in front
of the sound system.
-
ENFORCE
:Choose this option when using the cabinet in front
of the sound system.
MODE
LOCATION DELAY
NORMAL
NORMAL
150 Hz
NONE
ATOM15ASUB
Normal
+10
0
-10
Enforce
Push to Save and Return
Menu LOCATION
This menu allows you to optimize the response of ATOM15S and
ATOM18S when used alone or in groups.
-
NORMAL
: Choose this option when using the subwoofer in
nongroup mode.
-
CARDIOID
: Choose this option for a cardioid effect with the
pedestals in grouped mode.
-
ENDFIRE
: Choose this option when using two subwoofers in
longitudinal radiation one behind the other.
NORMAL
POLE
HF:0dB
LF:0dB
LOCATION
DELAY PO
DE
ATOM15ASUB
Normal
Cardioid
Endfire
Push to Save and Return
Menu DELAY
This menu allows you to add a delay time to the subwoofer to
align it over time.
The value of the delay is expressed in metres.
By default no delay time is applied.
DELAY
POLARITY X
TION
NORMAL
NORMAL
150 Hz
NONE
ATOM15ASUB
0.25m
Push to Save and Return
Menu POLARITY
This menu allows you to reverse the polarity of the sum of the
signals present at the input..
POLARITY
X-O
DELAY
NORMAL
NORMAL
150 Hz
0.25 m
ATOM15ASUB
Normal
Reverse
Push to Save and Return
Menu X-OVER
This menu is used to set the upper limit of the frequency range of
the subwoofer. The optimum setting is the minimum value of the
frequency range correctly reproduced by the full range speakers.
Among the available values for this setting you will find each of
the ATOM series full range speakers.
X-OVER
OUTPU
OLARITY
NORMAL
NORMAL
150 Hz
0.25 m
ATOM15ASUB
150Hz
Push to Save and Return
Menu OUTPUT
This menu is used to set the low limit of the frequency range sent
to outputs 1 and 2.
OUTPUT
UN
X-OVER
Y
NORMAL
NORMAL
150 Hz
0.25 m
ATOM15ASUB
100 Hz
Push to Save and Return
8 - Subwoofers DSP Menu