ATOM series -
2 ways 10/12/15" powered full range speaker and 15/18" powered subwoofer with DSP
Page 7
Note
: The power input and power button are the
same as on the full range speakers.
7 - Subwoofer amplifier modèle
1
2
3
4
1
Sorties 1 et 2
These line level outputs are used to retrieve the input
signals and re-inject them to another amplification
system (see OUTPUT menu on page 8).
Output 1 corresponds to input 1 and output 2
corresponds to input 2.
2
Entrée 1 et 2
Line-level left and right inputs via COMBO sockets.
COMBO sockets allow you to either connect a mono/
stereo male XLR or male Jack plug. These are balanced
inputs.
3
Integrated DSP diplay
Displays the settings of the built-in DSP.
The different settings of the DSP will be explained in
paragraph 8.
4
DSP settings button
Without pressing this button, you adjust the subwoofer
level.
Press this button to access the available settings or to
enter the different submenus.
Then turn this knob to scroll through the values of each
sub-menu.
Press again to confirm your settings.
6 - Caractéristiques techniques des caissons
ATOM15ASUB
ATOM18ASUB
Amplification
Class D / 2000W dynamic / 600W RMS
Class D / 2000W dynamic / 600W RMS
Frequency response
45 Hz - 160 KHz
35 Hz - 150 KHz
Power supply
SMPS / 100-240V ~ 50-60Hz
SPL
126 dB max.
127 dB max.
Woofer
15"
18"
8 Ohms - 600W AES
18"
Bobine de 3"
8 Ohms - 600W AES
Entrées
2 x COMBO 6.35 XLR
Sortie
2 XKR output
Réglages
multiple settings DSP (refer to paragraph 8 for more details)
Protection
Short-circuit, thermal and limiter
Construction et accrochages
5mm Cubic plywood housing
Integral grid
35mm mounting plate for speaker coupling rod
2 side handles
Ground stacking device
Dimensions
612 x 430 x 595 mm
662 x 510 x 615 mm
Poids net
32 Kg
38 Kg