ATOM series -
2 ways 10/12/15" powered full range speaker and 15/18" powered subwoofer with DSP
Page 4
1
Power input socket
Allows you to connect the speaker to an electrical outlet.
Use the supplied IEC cord, and make sure the voltage
delivered by the outlet is in adequation with the value
indicated by the voltage selector before turning on the
built-in amplifier.
2
Power switch
Allows you to turn ON/OFF the built-in amplifier.
3
XLR LINE OUT socket
Allows you to retrieve the sum of each incoming signal
and transmit it to another amplified speaker, mixing
desk, or speaker/amplifier system.
4
MIC/LINE input via COMBO plug
The COMBO plug allows you to connect either a male
XLR plug or male stereo/mono Jack plug.
5
LINE/MIC Selector
Allows you to adapt the impedance of the socket to the
type of signal detected.
When pressed, the entry level is adapted to a
microphone, when released it is adapted to a line level
signal.
6
Integrated DSP diplay
Displays the settings of the built-in DSP.
The different settings of the DSP will be explained in
paragraph 5.
7
DSP settings button
Press this button to access the available settings or to
enter the different submenus.
Then turn this knob to scroll through the values of each
sub-menu.
Press again to confirm your settings.
4 - Module d'amplification des enceintes
8
9
10
11
2
1
7
6
3
4
5