24
4 CD PLAYER
▲
Tip
·
If you would like to set the DC Servo option for more than just the
current input channel, please use keys
Ch+
and
Ch-
of the Audio-
net System Remote Control to select the desired input channel. The
PRE G2 does not leave the setup menu, and you are able to adjust the
DC Servo option for each input channel very easily.
7.5 Channel name
You can assign a fully user-definable name up to 12 characters in length
to each of the six input channels. Push the
set
key on the front panel five
times. The display will then show the number of the currently selected
input channel and the assigned channel name. The cursor in the 2
nd
line of
the display marks the character you now may alter.
Turn the
volume
knob to select the desired character. Push the
mute
key
to advance the cursor to the next character position. After last position the
cursor wraps around and starts at the first position again.
Tip
·
If you would like to re-name the channel name for more than just the
currently selected input channel, use keys
Ch+
and
Ch-
of the
Audionet System Remote Control to switch to the desired input
channel. The PRE G2 does not leave the setup menu, and you are
able to define the channel name for other input channels very easily.
Press key
of the Audionet System Remote Control to advance the
cursor one position to the right.
7.6 Set Autostart
Push the
set
key six times for less than two seconds to get to the
Autostart option.
Turn the
volume
knob on the front panel clockwise to activate the
Autostart function. Turn the
volume
knob counter clockwise to disable
the Autostart function.
currently selected input channel
cursor
assigned channel name
Summary of Contents for PRE G2
Page 1: ...1 Reference Pre Amplifier User s Manual ...
Page 2: ...2 ...
