17
SELECT INPUT:
5 INPUT FIVE
6.8 Input selection
Push the
input
key on the front panel, then select the desired input chan-
nel using the
volume
knob. The display shows:
The 2
nd
line of the display provides the number and the (user-definable)
name of the currently selected input channel.
The PRE G2 features a 'soft' input selection. During the switching of
inputs, first the volume is stepped down to –80 dB, followed by switching
off the outputs. Now the input section switches to the new input channel.
Afterwards the outputs are switched on again, and finally the volume is
stepped up to its original level.
Note
·
Leave the input selection function by pressing the
input
key again.
·
Using the Audionet System Remote Control
Harmony One
, select an
input channel by simply pressing the corresponding key (see section
'
Screen 1
' on page 30) or digit key (see section '
Key assignment
PRE G2
' on page 29). Alternatively, use the keys
Ch+
and
Ch-
to
switch to the next or previous input channel without using the
Se-
lect Input
function (see section '
Key assignment PRE G2
' on page
29).
6.9 Muting
Push the
mute
key on the front panel to mute or un-mute the PRE G2.
Just as well as the input selection, the PRE G2 uses 'soft' muting, i.e. vol-
ume is stepped down gently to –80 dB, then the outputs are switched off.
The 2
nd
line of the display informs the user of a muted unit with the text
MUTE
. The text is displayed even if the dim level is set to
Off
.
To de-mute the PRE G2 press the
mute
key again. Here as well, the vol-
ume is stepped up gently to its original level after switching on the outputs.
Summary of Contents for PRE G2
Page 1: ...1 Reference Pre Amplifier User s Manual ...
Page 2: ...2 ...
