23
front panel, the Audionet Link interface or the Auto On
function.
active
The AutoStart function is active. As soon as the AMP is
connected to mains power, the unit will start up to normal
operating mode automatically. Use this setting to control
the AMP using a timer device.
Tip
·
In order to use the AutoStart function with a timer device, the mains
switch 9 on the back panel has to be in position 'on' all the time. The
connection to mains is switched by the timer device in this case.
8.7 Overview factory defaults
Option
Setting
SET DIM LEVEL
50%
SET DISPLAY
Standard
SET INPUT
Line (Cinch)
SET AUTO ON
never on
SET AUTO OFF
never off
SET AUTOSTART
disabled
Note
·
The Warm Up countdown is preset by default to 1 hour and 15 min,
but de-activated (see section '
Warm Up Countdown
' on page 15).
