10
·
The AMP is a Class I unit and must be earthed. Please ensure a stable
earth connection. Phase ('hot' pin) is marked on the back panel
('
PHASE
') 7 .
·
If you connect the mains cord please make sure that mains switch 9
at the back panel is switched off.
·
Never pull the mains plug while the AMP is switched on! Before you
pull the mains cord off its socket 8 at the back panel, power down
the unit to stand-by mode and switch off the unit using mains switch
9 .
Only in cases of extended absence (like vacations) or if massive trouble
on the mains power is to be expected you should switch off the AMP
from the mains using mains switch 9 . To disconnect the unit completely
from mains pull the mains plug.
Tip
·
Using high quality mains cords may improve the sound quality.
Please consult your local Audionet dealer.
4.3 Orientation of mains plug
The correct polarization of mains is important for reasons of audio clarity
and stability. Please connect the mains cord so that the hot pin of the wall
outlet is connected to the pin of the mains input 8 marked '
PHASE
' 7 .
Note
·
Your Audionet AMP is able to detect a wrong polarization of the
mains plug during start-up. If the message
Attention: Mains
Phase incorrect!
appears in the display, when you switch on the unit from stand-by
mode using the
power
key, switch off the AMP completely and flip
the mains plug in the wall outlet (see section '
Mains phase detection
'
on page 14).