14
7 Protection system
Your AMP1 V2 has a powerful protection circuit to prevent damage of
the amplifier itself or the loudspeakers connected. In case of trouble the
AMP1 V2 is switched to stand-by state. The source of the problem is
indicated by a flash code of the LED next to the
power
key on the front
panel:
Error Code
Possible Cause
short short short
overload – left channel
short short long
overload – right channel
short long short
overheat – left channel
short long long
overheat – right channel
long short short
high frequency oscillation – left channel
long short long
high frequency oscillaiton – right channel
long long short
direct current (DC) – left channel
long long long
direct current (DC) – right channel
