Audiomedia GDF879, Manual

Page: 16 / 29

USB Device/Map Card Operation
Bluetooth
EN - 14
Using Map Card (SD/MMC Card)
1. Insert a map card (SD/MMC Card) into the
corresponding slot, the unit will load the map
and switch to navigation mode automatically,
then navigating by the touch screen.
2. To remove the card, you should first select
another source, in order to avoid damaging
the card, then press the card slightly, and
take off the card after it popped out.
Note: You can control the panel using the
touch panel control, refer to previous section:
“Panel Control”.
Using USB device
1. Insert a USB device into the USB connector.
When connecting a USB device, the unit will
read the files automatically.
2. To remove the USB device, you should
first select another source, in order to avoid
damaging the USB device. Then take off the
USB device.
USB Notes
USB functions (flash memory type) MP3 music
play
1. USB flash memory 2 in 1 support
2. Fat 1 2/fat 1 6/fat 32 is possible
- Fat 12/16 (dir: 200 support, file: 500
support)
- Fat 32 (dir: 200 support, file: 500 support)
3. File name: 32 byte/dir name: 32 byte /tag
name: 32 byte
4. Tag (ID3 tag ver 2.0)
- Title/artist/album: 32 byte support
5. USB 1.1 support
USB 2.0 support
(It can not support USB 2.0 speed. Just, get
the same speed with USB 1.1)
Not all kinds of USB devices are compatible
with the unit.
Note:
For your safety, avoid talking on the phone
as much as possible while driving.
Bluetooth is a wireless transmission way
for short distance. The built-in Bluetooth
can connect with the mobile phones having
Bluetooth function.
After connecting, you can control your
mobile phone through the unit.
Pairing
Use this function to establish a connection
between the unit and your mobile phone.
Press the
SRC
button repeatedly on the
panel or touch BT on the SOURCE menu to
enter BlueTooth mode.
SRC P A I R S E L
1 2 3 45 6 7
8 9 0
+
T o u c h P A I R , t h e n “ W A I T I N G F O R
PAIRING“ appears on the TFT .
Turn on Bluetooth function of your mobile
phone, keep phone within 3 meters to
the unit and start to search for Bluetooth
devices.
After the name of the Bluetooth module
“SUN-BMA19” appears on the pairing list
of your mobile phone, select it. At this
time, a pairing code is required. Enter the
pairing code (“0000” by default) and the
Bluetooth pairing will process automatically.
Some mobile phones may instruct you to
select connect or disconnect, please select
connecting.
After pairing successfully, the Bluetooth icon
stops to blink, “PAIR OK” will appear on the
screen.
To stop pairing, press PAIR during pairing.