- Commissioning -
19
2.5
R Signal button - Setting up
for T-NET
You can use the “R” signal button on your
telephone on private exchanges and when using
DEUTSCHE TELEKOM’s T-Net functions.
Private exchanges
If you have connected your telephone to a private
exchange, you can use all the facilities such as call
transfer, automatic recall, etc. The “R” signal
button gives you access to these facilities.
The FLASH time “100ms” will be required on a
private exchange. To make this setting, move the
slide switch on the underside to the “100ms”
position.
You can find out from the dealer from whom the
equipment was purchased whether your telephone
will work on your private exchange without any
problems and which other facilities you will have
access to.
T-NET functions
Your telephone supports the most important
DEUTSCHE TELEKOM added value services (e.g.
brokering, call waiting, three-way conferencing,
etc.). Please contact DEUTSCHE TELEKOM to gain
access to these functions (some of which are
subject to charge). When using T-NET functions,
move the slide switch on the underside to the
“300ms” position.
