- Commissioning -
18
2. Commissioning
2.1 Safety
Information
NOTE! Be sure to read the safety information on
Page 16 of these instructions before
commissioning.
2.2
Check contents of pack
The following items are supplied:
one telephone base
one telephone
receiver
one telephone connection
cable
one spiral cable
one operating manual
2.3
Connecting the receiver
After unpacking your telephone, you must first
connect the telephone receiver to the base unit. To
do this, take the short end of the spiral cable and
plug it into the socket at the bottom of the
receiver.
Plug the long end into the socket provided for the
purpose on the underside of the base unit and feed
the cable through the cable channel to the outside.
2.4
Connecting the telephone
Connect the telephone cable supplied to the
telephone socket and the telephone jack on the
underside of the telephone. Then feed the cable
out of the telephone housing either upwards or
downwards through the cable guide. Clip the cable
firmly in the cable channel. The telephone works
using the tone dialling system.
