- Setting up -
43
3.5
Connect Mains Power Supply
In order to enjoy maximum convenience, we recommend the use of the mains
power supply provided. The telephone can also be used without the power
supply however if connection is not possible. You will need the batteries even
when using the mains power supply to protect against power cuts. Connect the
main power supply to the power socket and the jack marked
DC 9V
on the
underside of the telephone.
Note:
You can also use your telephone without the mains power supply
provided. Please note that the batteries must then be changed after about 6
months.
3.6
Connecting the telephone cable
Connect the telephone cable supplied to the telephone socket and the
telephone jack
on the underside of the telephone. Feed the cable out of the
telephone housing either upwards or downwards through the cable guide, if you
are using the telephone fitted to the wall.
3.7
Fitting the desk support
If you intend to use your telephone on a desk, then the desk support supplied
must be fitted. To do this, turn the telephone over. Now insert the two upper
hooks into the openings provided and push the desk support firmly home.
If you ever need to remove the support, press gently on the middle clips on the
upper edge and then pull the desk support off.
In the receiver rest there is a small hanging device, which is used when the
telephone is wall mounted. This hanging device is not required when the
telephone is used on a desk, as it impedes the lifting of the receiver. Using a
small screwdriver, turn this hanging device until the screw is completely flush
and its upper end does not protrude at all.
