- Multiple handsets -
65
9.3.4
Logging off handsets
A handset can only be logged off using another handset that is still logged-on. It is therefore
not possible to carry out the logging-off procedure using the handset that is to be logged off.
1. Press
the
button on the handset.
2. Select the
SETUP
menu with
and
and confirm with
.
3. Select the
DEL HANDSET
function with
and
and confirm with
.
4.
Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm with
the
button
.
5.
Now select the number 1 or 2 of the handset to be logged off and confirm with the
button. You can abort the process by pressing the
button. If the logging-off is
successful, after a few seconds you will hear a signal tone. The handset is now logged
off and can no longer be used for external and internal calls.
9.4 Additional
base
stations
You can increase the range of the handsets by using several base stations. In order to
make use of this effect, all base stations must be connected to a telephone socket.
Depending upon the application, you can allocate the same telephone number to each base
station or you can give the base stations different numbers. Make sure that the ranges of all
base stations overlap. Each handset must be logging on to each basis station. Please test
the range of the handsets before putting a new base station into operation.
If a handset is logged on to the base station and if the automatic base station selection is
activated (further information in this chapter), the handset is always forwarded automatically
to the nearest base station.
Current calls cannot
be transferred from one base station to
another.
Selecting a base station
1. Press
the
button on the handset.
2. Select the
REGISTER
menu with
and
and confirm with
.
3. Select the
SELECT BASE
menu with
and
and confirm with
.
4.
The display will now show all base stations that the handset is already logged on to.
The number of the currently active base station will flash. Select the required base
station to which the handset is to be switched by means of the number pad.
Or change to the
AUTO
setting with the
and
buttons
.
With this setting, the
handset changes automatically to the nearest base station when the connection to the
current base station becomes too weak.
5. Confirm
with
the
button
.
Summary of Contents for DECT804
Page 2: ...2 DECT8048 Bedienungsanleitung _________3 Operating Instructions _______37 ...
Page 70: ......
Page 71: ......
