17
Installation Manual
P
ANTAGES
G4
Configurations
3 Channel
If you have a pair of power hungry 8 ohm speaker that can handle the prodigious
power (600 watts!) of the Pantages G4, then hook them up! Run the left input to
Channel input 1 and run the right to Channel input 4. Press the mono button for
each channel pair then adjust the gain controls for each pair so that there are the
same. Use detents for quick set up – you’ll have more than enough gain to blow out
your windows if that’s your thing. Your Center speaker connects to channel 3 in this
configuration. Truly amazing!
*Pro tip: Loop the input from 1 to 2 and 4 to 5 for an extra 3 dB!
Switch
MONO
Switch MONO
Connect to
Preamplifier/Receiver
Line-Level outputs
Center
Left
Left
Right
Center
Right
Your Amazingly-
Wonderful Full-Range
Pride and Joy Speakers
(8 Ohm Minimum)
Your Amazingly-
Wonderful Full-Range
Pride and Joy Speakers
(8 Ohm Minimum)
No Ordinary
Center-Channel Speaker
