manualshive.com logo in svg

AudioControl MAESTRO X-7, Installation Manual

Share
Download
AudioControl MAESTRO X-7 Installation Manual Download Page 38

38

Maestro X series 

Troubleshooting

Troubleshooting Common Problems

General

There are no lights on the Maestro X series

 

9

 Pressing any button on the front panel should wake the Maestro X series.

 

9

 Verify that the power cord is plugged into a live AC outlet.

 

9

 Verify that the front panel Power switch on the Maestro X series is “On”.

 

9

The main front panel display is blank

 

9

 Press the Display button. This button controls the display brightness and 
also allows you to turn the display off entirely.

 

9

The main zone changes while selecting sources from Zone 2

 

9

 Change the Zone 1 Control option in the Zone 2 Configuration Menu to 
Off.

Video

No video/picture

 

9

Verify your video display or projector is turned on and set to the correct 
input for the Maestro X series. Press the Menu button on the Maestro X 
series and look for the Setup Menus to show on the video display.

 

9

Verify the correct input on the video display is selected for the output of 
the source.

 

9

Verify the Video Input assignment configurations. Make certain that the 
correct video input is assigned to the source you are playing.

No Video on Zone 2

 

9

Verify the HDMI  input from the source is connected.

 

9

There is no On-Screen Display (OSD)

 

9

Verify the OSD is turned on in the Maestro X series configuration settings.

 

9

Verify that the correct input is selected on the video display or  projector.

Summary of Contents for MAESTRO X-7


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands