AudioControl MAESTRO X-7 Installation Manual Download Page 10

Page: 10 / 49

Maestro X series

Rear Panel Features

1. WiFi ANTENNA - WiFi is enabled in the

Maestro X series. Attach the included

antennas here.

2. ETHERNET CONNECTION - Your Maestro

X series can be connected and controlled

through a computer or automaton network

via this Ethernet connection. The OSD on

screen display allows you to set up the unit’s

network parameters.

3. USB CONNECTION - Your Maestro X series

has the ability to accept and play audio files

from a USB drive. The USB connection can

also be used to update the unit’s firmware

from a downloaded file saved on a USB

drive.

4. ANALOG AUDIO INPUTS - There are

6 analog stereo input RCA pairs, each

labeled with the name of a typical source

unit. Connect these to the line-level analog

outputs of your source units.

Guided Tour of the Maestro X series

5. HDMI OUTPUT - The three HDMI outputs

connect to the HDMI inputs of your TV

displays (Alt Output not available on the

X-4), your main home theater, and an

alternate display. The main output is eARC

enabled the for latest high quality audio

formats from your TV’s streaming apps.

Zone 2 output enables viewing and listening

to a source independently of the main home

theater system.

6. FM CONNECTION - This antenna input

should be connected to the supplied FM

antenna. For improved reception, you may

want to consider a roof-mounted external

antenna.

7. DIGITAL AUDIO INPUTS - There are

4 coaxial and 2 optical digital audio inputs,

each labeled with the name of a typical

source unit. Connect these to the digital

outputs of your source units.

BD L

CD L

BD R

CD R

STB

OUT

STB

GAME

SAT

RS232

TRIG

ETHERNET

DIGITAL AUDIO

HDMI (4K)

BALANCED ANALOG OUTPUTS

BALANCED ANALOG INPUTS

ANALOG

INPUTS

PREAMP OUTPUTS

UHD

PVR

115

230

Serial Number

SBL

SBR

CENTER

SUB 1

CHANNEL 15

CHANNEL 13

HEIGHT 2 L

HEIGHT 1 L

SURR BACK L

SURROUND L

CENTER

FRONT L

CHANNEL 16

CHANNEL 14

HEIGHT 2 R

HEIGHT 1 R

SURR BACK R

SURROUND R

SUB 1

FRONT R

eARC

MAIN

ALT

ZONE 2

ZONE 1

USB 5V / 1A

HEIGHT 2

HEIGHT 1

ZONE 2

LINE OUT

SUB 2

STB

GAME

PVR

CH 13 / 14

CH 15 / 16

SWITCH POSITIONS

115 = 110 - 115 V ~

230 = 220 - 240 V ~

交流输入

AC INLET

~ 50 - 60 Hz

1.5 KW MAX

PVR

SAT

BLUETOOTH

WI-FI

FRONT LEDS

22410 70th Ave West | Seattle, WA 98043

www.audiocontrol.com

CAUTION – SHOCK HAZARD, DO NOT OPEN

ATTENTION – RISQUE DE CHOC, NE PAS ENLEVER

PRECAUCION – PELIGRO DESCARGA, NO ABRIR

ACHTUNG – VOR OEFFNEN DES GERAETES

NETZSTECKER ZIEHEN

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are

trademarks of Dolby Laboratories.
For DTS patents, see https://patents.dts.com.
HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Auro Technologies.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

16 17 18 19 20

Summary of Contents for MAESTRO X-7

















































Search results

Summary of Contents for MAESTRO X-7

Reviews:

Brands by name

Popular brands

AudioControl MAESTRO X-7, Installation Manual

Search results

Summary of Contents for MAESTRO X-7

Reviews:

Brands by name

Popular brands