AudioControl Maestro M8, User Experience Manual

Page: 32 / 50

®
32
n
avIgatIng tHe
s
et
-u
p
M
enus
M
aestro
M8™
Video Outputs
The Maestro M8 is not only a great sounding home theater processor but
it is also a very powerful video processor. To that extent it has a number
of video settings that need to be selected carefully to optimize your video
performance.
Zone 1 OSD (On Screen Display): While the set-up menus will
always show on your display device, you have the option of selecting
whether your Main Zone general settings (volume, subwoofer level,
etc.) show up on the bottom of the screen as an On Screen Display
(OSD). The options are “On” or “Off”.
Zone 2 OSD (On Screen Display): If you have an composite video
display with your Zone 2 configuration, you have the option of select-
ing whether your Zone 2 receieves general setting information (vol-
ume, source selection etc...) via that display. The options are “On”
and “Off”.
HDMI Output: Selects the output resolution for HDMI Outputs
with the options being a list of the available display devices or “Pre-
ferred”.
In the Preferred mode, this output matches the highest
preferred resolution of the display device.
HDMI Output Frame Rate: Selects the output frame rate for HDMI
Outputs with the available options being displayed in the drop down
menu’s. Frame rates that are not supported by the display device
cannot be selected.
Lipsync (Information Only): When this feature is supported by the
display device, this setting displays how much lip sync is applied to
HDMI Outputs.