AudioControl Maestro M8, User Experience Manual

Page: 15 / 50

®
15
M
aestro
M8™
Remote Features:
Multifunction Remote - It can control up to 8 devices! Automati-
cally configures to the mode of control of the source selected per the
source buttons.
LED indicator - This red LED will blink when a key is pressed. It will
also blink multiple times when a device code is input for programming
or signal the beginning and end of a programmed sequence.
Back-lit Keys - The keys are back-lit to make it easy for you control
your AV devices in a dimly lit room.
Low Voltage Indicator - The red LED will flash 5 times after a normal key
press to tell you that new batteries are needed.
Other useful items:
Time Out - After entering into the programming state of the remote,
30 seconds after the last button is pressed, the remote returns to nor-
mal operation.
Stuck Key Timeout - If the remote has slipped into the cushions of your
couch and a button is pushed in for more than 30 seconds, the remote will
stop sending IR information to conserve the battery. It will resume normal
operation after the button has been released.
General Functions:
The Device or Source keys allow you to switch between your various inputs
on the Maestro M8. After pressing the device key, the remote actually
changes it’s configuration - it now is the source’s remote control. So if you
have programmed the STB with the learned codes from an Apple TV re-
mote – after pressing the AV button, the remote buttons will automatically
configure to the Apple remote key-map as programmed. Volume control
remains locked to the Maestro M8 “AMP” mode however. This is so that
anytime you press these keys, you are controlling the Volume or Mute state
of the Maestro M8 regardless of the device you are controller (BluRay or
your Cable box for instance).
Multifunction Remote
LED Indicator
C
ontrol of
y
our
M
aestro
M8