AudioCodes MediaPack MP-114, User Manual

Page: 78 / 164

User's Manual 78 Document #: LTRT-71405
MediaPack Series
3. To change the password of an account:
a. In the 'Current Password' field, enter the current password.
b. In the 'New Password' and 'Confirm New Password' fields, enter the new
password.
c. Click Change Password; if you are currently logged in to the Web interface with
this account, the 'Web Login' dialog box appears.
d. Log in with your new password.
4. To change the access level of the optional, second account:
a. Under the Account Data for User: User group, from the 'Access Level' drop-down
list, select a new access level user.
b. Click Change Access Level; the new access level is applied immediately.
6.5.1.5.1.2 Advanced User Accounts Configuration
This section describes advanced Web user account configuration. This is relevant if you
need the following management scheme:

Enhanced security settings per Web user (e.g., limit session duration)
More than two Web user accounts (up to 10 Web user accounts)

Master users
This advanced Web user configuration is done in the Web Users table, which is initially
accessed from the Web User Accounts page (see procedure below). Once this table is
accessed, subsequent access immediately opens the Web Users table instead of the Web
User Accounts page.
Notes:
•
Only the Security Administrator user can initially access the Web Users
table.
•
Only Security Administrator and Master users can add, edit, or delete
users.
•
Admin users have read-only privileges in the Web Users table. Monitor
users have no access to this page.
•
If you delete a user who is currently in an active Web session, the user is
immediately logged off by the device.
•
All users can change their own passwords. This is done in the WEB
Security Settings page (see Web Security Settings on page 82).
•
To remove the Web Users table and revert to the Web User Accounts
page with the pre-configured, default Web user accounts, set the
ResetWebPassword ini file parameter to 1. This also deletes all other Web
users.
•
Once the Web Users table is accessed, Monitor users and Admin users
can only change their passwords in the Web Security Settings page
(see Web Security Settings on page 82). The new password must have at
least four different characters than the previous password. (The Security
Administrator users and Master users can change their passwords in the
Web Users table and in the Web Security Settings page.)