AudioCodes MediaPack MP-114, User Manual

Page: 76 / 164

User's Manual 76 Document #: LTRT-71405
MediaPack Series
By default, the device is pre-configured with the following two Web user accounts:
Pre-configured Web User Accounts
User Access Level Username
(Case-Sensitive)
Password
(Case-Sensitive)
Security Administrator Admin Admin
Monitor User User
After you log in to the Web interface, the username is displayed on the toolbar.
If the Web session is idle (i.e., no actions are performed) for more than five minutes, the
Web session expires and you are once again requested to login with your username and
password. Users can be banned for a period of time upon a user-defined number of
unsuccessful login attempts. Login information (such as how many login attempts were
made and the last successful login time) can be presented to the user.

To prevent user access after a specific number of failed logins:
1. From the 'Deny Access On Fail Count' drop-down list, select the number of failed
logins after which the user is prevented access to the device for a user-defined time
(see next step).
2. In the 'Deny Authentication Timer' field, enter the interval (in seconds) that the user
needs to wait before a new login attempt from the same IP address can be done after
reaching the number of failed login attempts (defined in the previous step).
Notes:
•
For security reasons, it's recommended that you change the default
username and password.
•
The Security Administrator user can change all attributes of all Web
user accounts. Web users with access levels other than Security
Administrator can change only their password and username.
•
To restore the two Web user accounts to default settings (usernames
and passwords), set the ini file parameter ResetWebPassword to 1.
•
To log in to the Web interface with a different Web user, click the Log off
button and then login with a different username and password.
•
You can set the entire Web interface to read-only (regardless of Web
user access levels), by using the ini file parameter DisableWebConfig
(refer to the 'Web and Telnet Parameters' in the Product Reference
Manual).
•
You can define additional Web user accounts using a RADIUS server
(refer to the 'Configuring RADIUS Settings' in the Product Reference
Manual).