AudioCodes MediaPack MP-114, User Manual

Page: 32 / 164

User's Manual 32 Document #: LTRT-71405
MediaPack Series
Notes on Configuration URLs:

Additional URLs may be specified, as described in the System ini File Parameters in
the Product Reference Manual.

Updates to non-ini files are performed only once. To update a previously-loaded
binary file, you must update the ini file containing the URL for the file.

To provide differential configuration for each of the devices in a network, add the string
"<MAC>" to the URL. This mnemonic is replaced with the hardware (MAC) address of
the device.

To update the firmware image using the Automatic Update facility, use the
CMPFILEURL parameter to point to the image file. As a precaution (in order to protect
the device from an accidental update), you must also set AUTOUPDATECMPFILE to
1.

URLs may be as long as 255 characters.
Note: For the following parameters, the URLs are reset to their default value on
successful Autoupdate. Subsequent Autoupdates without re-initializing the parameters
are not supported.
•
CptFileUrl
•
PrtFileUrl
•
FXSCoeffFileUrl
•
FXOCoeffFileUrl
•
CasFileUrl
•
DialPlanFileUrl
•
TLSPkeyFileUrl
•
TLSCertFileUrl
•
TLSRootFileUrl
•
WebLogoFileUrl
•
V5PortConfigurationFileURL

To utilize Automatic Updates for deploying the device with minimum manual
configuration:
1. Set up a Web server (in this example it is http://www.corp.com/) where all the
configuration files are to be stored.
2. On each device, pre-configure the following setting: (DHCP/DNS are assumed)
INIFILEURL = 'http://www.corp.com/master_configuration.ini'