Hardware Installation Manual
4. Deploying the Device
Version 7.2
25
Mediant 9000 Series SBC
Note:
•
Mediant 9080 / Mediant 9000 Rev. B:
The figure represents a configuration with
12x1GbE ports. If the device is configured with 10GbE ports (GE_9 until GE_12),
then the correct port order is as follows: GE_12 | GE_11 | GE_10 | GE_9.
•
Mediant 9030:
GE_1, GE_2, GE_3, and GE_4 ports can be used
only
for signaling
(SIP), OAMP, and HA Maintenance. These ports must not be used for media traffic.
To connect the device to the IP network:
Use an Ethernet cable to connect an RJ-45 network port on the server's rear panel to
the LAN.
Figure 4-3: Connecting the Device to the IP Network - Mediant 9080 / Mediant 9000 Rev. B
Figure 4-4: Connecting the Device to the IP Network - Mediant 9030
Note:
•
The port used for OAM&P depends on the Mediant 9000 series product:
√
Mediant 9080 / Mediant 9000 Rev. B:
Port GE_1
√
Mediant 9030:
Port GE_5
•
The HP iLO port is not used for management of the SBC application; it's used only
for hardware management and monitoring. For more information, see
https://www.hpe.com/us/en/servers/integrated-lights-out-ilo.html
.
Summary of Contents for Mediant 9000 Rev. B
Page 2: ......
