Version 7.0
85
Performance Monitoring and Alarms
Performance Monitoring and Alarms
3. Alarms
Additional Info
Additional Info 1 field will include following details:
Region: X1 'X2' [GW: Y1 'Y2' 'Y3' 'Y4']
X1 = Region ID (unique identifier in the EMS data base used for region
identification)
X2 = Region name as it defined by EMS operator
Y1 = GW ID (unique identifier in the EMS data base used for GW
identification)
Y2 = GW Name as it defined by EMS operator
Y3 = GW IP as it defined by EMS operator
Y4 = GW Type as it identified by EMS during the first connection to the
GW. If first connection was not successful during the add operation, it
will trigger an 'Add GW' event with Unknown GW type, and 'Update
GW' event once the initial connection to the GW has been successfull.
The following GWs will be supported: MP,M1K, M2K, M3K, M5K, M8K
Region details will always be part of the alarm, while GW info will be
displayed when event is GW related.
All the fields related to the GW will always be displayed to allow easy
parsing.
Examples:
(Description=Add Region) Region: 7 'Test Lab'
(Description=Update Region) Region: 7 'My Updated Region'
(Description=Add GW) Region: 7 'My Updated Region', GW:
22 'MG14' '1.2.3.4' 'Unknown', PM Polling: disabled
(Description=Update GW) Region: 7 'My Updated Region', GW:
22 'My MG 15' '4.5.6.7' 'M3K'
(Description=Update GW) Region: 7 'My Updated Region', GW:
22 'My MG 15' '4.5.6.7', PM Polling: enabled
(Description=Remove GW) Region: 7 'My Updated Region', GW:
22 'My MG 15' '4.5.6.7' 'M3K', Polling: enabled
(Description=Remove Region) Region: 7 'My Updated Region'
Corrective Action
Media Gateways
