Radio
TV Sound Stand
GB
58
CUSTOMER SERVICE
www.gt-support.de
00800 - 45622000
GB
11. RADIO
If the stations provide the information, station names and tracks appear on the display.
The display can be changed by pressing the
RDS
button for a short time.
1.
Turn the power switch on the rear to on (
I
).
2.
Press the
button to turn on the TV sound stand.
3.
To enter radio mode, press the
FM
button on the remote control of the TV sound
stand until
FM
appears on the display.
11.1 SETTING THE STATIONS
The display shows the adjusted frequency.
•
Unwind the cable antenna completely. Try out different positions in order to im-
prove the reception quality and change the location of the device if necessary.
•
Press the
4
/
¢
buttons to set the desired station.
- Press briefly
4
/
¢
: change the frequency in steps of 0.05 MHz.
- Hold down
4
/
¢
until the frequency changes: starts the station search,
stops at the next strong station signal.
11.2 SAVING THE STATIONS
You can store up to 30 FM stations.
Automatic station search
The automatic station search automatically searches for and saves the first 30 stations
with sufficient reception.
•
Press and hold down the
SCAN
button until
AUTO
appears on the display. The sta-
tion search starts and the first 30 stations found are automatically stored in as-
cending frequency in storage locations 1 to 30. The station in the first storage
location is automatically played back.
_TVS264_2018_Soundstand_AudioAffairs.book Seite 58 Donnerstag, 30. August 2018 9:17 09
