CUSTOMER SERVICE
57
Operation
GB
TV Sound Stand
www.gt-support.de
00800 - 45622000
GB
10.5 ADJUSTING THE EQUALIZER
To adjust the sound to your preferences, there are three different settings:
FLAT, MOVIE
and
MUSIC
.
Press the corresponding button until the corresponding word appears on the display.
10.6 SETTING
THE TIME
NOTE:
if no button is pressed for 15 seconds, the adjustment procedure is exited.
1.
In standby mode, press the
CLOCK
button for about 2 seconds.
CLOCK SET
appears. The hour display then flashes (
0).
2.
Press
VOL
+/-
in order to adjust the hours.
To save the setting, press the CLOCK
button. The minute indicator flashes
(
00).
3.
Press
VOL
+/-
in order to set the minutes.
To save the setting, press the CLOCK
button.
The time is now adjusted.
During operation, press the
CLOCK
button briefly to call up the time.
10.7 SWITCH OFF WITH SLEEP
The sleep function allows you to set a time after which the device turns off.
1.
Turn the device on.
2.
Press the
SLEEP
button.
SLEEP 120
appears on the display.
3.
By pressing the
SLEEP
button you switch between
120, 90, 60, 30, 15, 10
minutes
or
00
(Off ). After approx. 3 seconds, the normal display appears again and the set-
ting is saved. When the set time has elapsed, the device switches off.
NOTES:
•
When the sleep function is activated, the remaining time can be displayed by
briefly pressing the
SLEEP
button once.
•
If an alarm is triggered when the sleep function is activated, this terminates the
function.
10.8 DIMMER
•
Press the
DIMMER
button to adjust the brightness of the display in 3 steps or to
switch it off completely.
Equalizer
Press the button
no equalizer
FLAT
for movies
MOVIE
for music
MUSIC
_TVS264_2018_Soundstand_AudioAffairs.book Seite 57 Donnerstag, 30. August 2018 9:17 09
