Audio RMS 2020, User Manual

Page: 7 / 31

88
7
CHAPTER
2
DX 2020 Receiver
The DX 2020 diversity receiver in the RMS 2020
range can be used, in conjunction with a TX 2020 or
HX 2000 transmitter. Alternatively, up to four DX 2020
receivers can be rack mounted for applications
where multiple wireless microphone systems are
required.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Controls, displays, and connections
Bottom panel
Headphone
level
Battery
compartment RX1
RX2
TX low
battery
RX low
battery No
signal
On
Off
F1
F2
Batteries
Holds three DL123A 3 volt Lithium batteries.
RX1/RX2 indicators
Indicate which of the unit’s two built-in receivers is
active at any time.
TX/RX low battery indicators
Illuminate when the unit detects low battery power in
either the TX 2020 Pocket Transmitter or DX 2020
Receiver. The units should not be used when a low
battery power indicator is illuminated as poor operation
may result.
No-signal indicators
Illuminated when no carrier signal is being received,
such as when the transmitter is switched off or set to an
incorrect frequency.
On/Off
Switches the power on or off. Additionally the output
cable includes a link which disconnects power when
the Lemo plug is removed, in which case the switch can
be left on.