- 5 -
A10-TX User Guide
Connectors, Controls Description
2
1
3
4
9
12
11
6
7
10
5
8
Figure 1: A10-TX transmitter with open battery compartment
1 -Antenna Socket
SMA connector, 50 ohm, connects to includ-
ed 1/4-wave whip antenna.
2 -Power LED
Blue LED illuminates when unit is powered
on and screensave is active. Solid blue LED
can be turned off in the Menu. The LED
flashes blue when unit is in Sleep mode.
3 -Display
OLED screen. Screen automatically turns off
during operation for battery savings.
4 -Left Button
Moves selection in menu to the left, or decre-
ments values.
5 -Power Button
Press to power on the unit. Press and hold to
power down the unit.
6 -Audio Input Connector
Balanced LEMO-3 connector. Accepts mul
-
tiple audio input types including unbalanced
lavalier, balanced microphone, balanced line.
Also used for timecode input and output.
7 -Input Overload LED
Red LED illuminates when clipping occurs.
8 -Menu Button
Enters the menu selection. Also used to select
options in the menu.
9 -Right Button
Moves menu selection to the right, or incre-
ments values.
10 - microSD Card Slot
The card slot is used to record files and load
firmware updates on the unit.
11 - Battery Tray
Accepts two AA LR6 batteries.
12 - Battery Door Latch
Press both latches to open the battery door.
