Audio A10-RX-SL, User Manual

Page: 9 / 20

- 9 -
A10-RX User Guide
Outputs Sub-Menu
Selections Icon Description Channel
or Global
Options
Exit Returns to the main menu
Max Level Selects the maximum analogue output level Output
level based on a 0 dBFS signal sent from an A10-TX
transmitter
Channel • +14 dBu
• +2 dBu
• -10 dBu
• -22 dBu
Audio Polarity Selects the polarity of the balanced output signal Channel • Normal
• Inverted
Mode
Chooses the audio output type of the A10-RX
When the A10-RX is set to AES the channel 2 XLR
connection is not used
Global • Analogue
• AES
Test Tone Activates a 1 kHz tone oscillator sent directly to the
outputs
ª
This disrupts the output from a linked A10-TX
transmitter.
Global • -18 dB
• -12 dB
• -6 dB
• 0 dB
Settings Sub-Menu
ª
All setting are Global.
Selections Icon Description Options
Exit Returns to the main menu
Screen Brightness
Sets the brightness of the OLED screen Five increments, 1–5, 5 is brightest
Screensaver Sets the duration, in seconds, how long the screen
remains on after a button press. Off keeps the screen
on continuously with no screensaver
• Off - display remains on when unit
is powered
• 5 sec
• 30 sec
• 120 sec
Orientation Sets the operating orientation of the menu screen and
LEDs The A10-RX can be used in an orientation with
the buttons below the screen (normal), or with the
buttons to the top (flipped).
• Normal
• Flipped
LEDs When set to On the LEDs remain illuminated. Off
deactivates the LEDs
• On
• Off
TV Ch Map
Selects the TV channel spacing in MHz to ensure
channel selection corresponds to a specific geographic
region. See frequency chart.
•
X
– 6 MHz
• Y – 7 MHz
• Z – 8 MHz