- 7 -
A10-RX User Guide
Main Display
When the receiver is first powered on, the main display is in two-channel view.
Two-Channel View
The display shows channel 1 and channel 2 simultaneously Parameters displayed include the RF
signal strength at each antenna, receiver frequency, audio level, and transmitter battery level.
1
2
3
4
5
6
1 -Channel 1 Settings
Bars indicates RF signal strength at each
antenna
2 -Channel 2 Settings
Bars indicates RF signal strength at each
antenna
3 -TX Battery Status
Battery icons indicate status of transmitters’
batteries
4 -Audio Level
Each channel shows a horizontal meter for
audio levels
5 -Frequency
Receiver frequency for each channel.
6 -Channel/Sub-channel Assignment
Displays region, channel, and sub-channel
frequency assignment for each transmitter.
ª
X, Y, and Z regions are selected by the TV Channel Map
setting.
Single-Channel View
Pressing the Left or Right buttons when in two-channel view changes the display to a single-
channel view of channel 1 or 2, respectively
In addition to the parameters shown in single channel view, the transmitter gain level is indi-
cated in single channel view Pressing the Right button again shows the A10-TX metadata for the
transmitter associated with the channel
ª
An asterisk next to the sub channel indicates that the set frequency is not directly on a
preassigned sub channel.
