Page of
5
32
Connecting &
positioning
the speakers
Unpack the speakers and put them on the stands.
The heavier speaker is the left one, the lighter speaker
the right one. You will need the long, thick speaker
wire, the 3.5mm mini-jack to mini-jack audio cable
and the power cord, as well as the remote.
Thread the uncovered ends of the speaker wire into
the holes perpendicular to the speaker binding posts
on the back - you should loosen & fasten each screw
on the binding post as appropriate. Make sure the
red & black marked posts on the left & right speaker
correspond - the speaker wire has a lighter & darker
thread to help you with this.
The stands allow you to partially hide the speaker
cable by running it inside the main vertical pole.
Sit down & listen
