P.4
SPEAKER RECEIVERS
1. Insert 6 ‘C’ cell alkaline batteries into the battery compartment with correct polarity at
the bottom of each speaker (batteries not included in the package) or connect the 9V
power adapter to the DC input jack on the bottom of each speaker, then plug it to the
wall AC outlet.
2. Press On/Off button and turn the speakers ON. The POWER LED will light up in Blue.
Switch off the speakers by pressing the ON/OFF button on the speakers or on the
remote control unit, and the LED will be off.
3. To suit the needs of different users, these speakers are designed for optional wall
mounting. There are two holes at the back of each speaker for you to easily hang
them on the wall.
P.5
REMOTE CONTROL UNIT
1. Remove the battery cover at the rear of the remote control unit and insert 2 “AAA”
size batteries (not included) into the battery compartment with the correct polarity.
2. Place back the cover and close the battery compartment.
OPERATION
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The blue signal LED on the transmitter will light up.
2. Select the channel (1 or 2) of the transmitter for best performance in your location.
3. Turn on the ON/OFF button on the speakers (the ON/OFF button on the remote
control unit cannot be used as a primary device to switch on the speakers). Press the
“AUTO TUNE” button to get the best tuning reception in the speakers. When the
button is pressed, frequency tuning starts automatically and it stops when a signal is
detected. Tuning process can also be activated by pressing the “AUTO TUNE”
button on the remote control unit.
4. Volume can be adjusted up by pressing the “+” button or down by pressing the
button “-“ to the desired listening level, or you can press the “+” button, or “-“ button
on the remote control unit to adjust the volume level.
