Studio Broadcast System
Page 10 of 11
Return to the MCU and select the “home screen”
The BP24 that has just been turned on should be shown in the display on the
channel number that you have set via the BP24 channel selection process.
Press the GUI on the displayed channel to highlight/select the channel of the BP24
that you are operating. This will allow all information about this particular channel
to be observed on the other screens. It also selects this particular channel for
output to the front-mounted headphone monitor jack.
You may now listen to your selected beltpack, or if you prefer, you can observe its
operation characteristics by selecting the “transmitter detail” button:
Repeat this process for as many RP32s and BP24s as needed for the application.
No frequency or channel coordination is required. Simply ensure that only one
beltpack channel is in operation for each channel (up to 24) in each system ID.
(Do
not attempt to set 2 BP channels to the same channel # in the same system. The
system will not operate).
