manualshive.com logo in svg

Audio Technica ATUC-50, Instruction Manual

Share
Download
Audio Technica ATUC-50 Instruction Manual Download Page 45

45

 

When Priority Is On

Talk Mode

Left Button*

Right Button

All Button Toggle

Push to Talk

Cut/Mute

Talk ON

Permit Next

Talk ON

Voice

Cut/Mute

Self Mute

Permit Next

Self Mute

* Depends on the “Left Button Function Assign” setting.

⑥

   (talk) LED

⑦

 Cut/mute LED

⑧

 </> monitor channel selection buttons

While you use these buttons, the currently selected monitor 
channel appears on the display.
• FL: Audio from floor channel
• 01 - 03: Audio from groups 1 to 3.

⑨

 Display

When changing the monitor channel or adjusting the volume 
level, the currently set value is displayed.

⑩

 Power LED

The dot on the far right is always lit while the power is on.

⑪

 Infrared transmitter

⑫

 Rear LED

Indicates the talking state and the remaining charge in the 
battery.
• While talking: lit
• While requesting to talk: blinks
• Talking off: off (can be changed to dimmer)
• Battery low: blinks orange

• The LEDs can change to 9 colors.

⑬

 Headphone jack

Speech from the selected monitor channel is output.

⑭

 –/+ Headphone volume adjustment buttons

When operating these buttons, the current volume level (0 to 
20) is shown on the display.

⑮

 Power switch

⑯

 AC adapter jack

⑰

 Rechargeable battery/rechargeable battery cover 

release button

⑱

 Service jack

Summary of Contents for ATUC-50





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands