Audio Technica ATLK-EXT165, Instruction Manual

Page: 22 / 81

22
Changing settings from ATUC-50CU
You can change CU settings by selecting “Set” on the HOME screen
of the CU display. Changeable items are as follows.
For more detailed settings, or for individual DU/IU/INT settings,
use Web Remote.
• After changing the network setting item(s), restart the
CU to enable the setting values.
Set Menu Items
[1] System Setting (
➤
page
44)
01 Device Name ATUC-50CU
02 Link Port Set
CU A/B, DU C/D
03 CU Link Mode
Primary, Extension Pass Thru,
Extension Last Unit
04 CU Error Notice
On, Off
05 IP Setting
01 IP Config Mode Auto, Static
02 IP Address 0.0.0.0 - 255.255.255.255
03 Subnet Mask
0.0.0.0 - 255.255.255.255
04 Gateway Address
0.0.0.0 - 255.255.255.255
06 Allow Discovery On, Off
07 IP Ctrl Setting
01 IP Ctrl Port No
00001 - 65535
02 IP Ctrl Ntfy
On, Off
03 Audio Level Ntfy On, Off
04 M-cast Adrs 0.0.0.0 - 255.255.255.255
05 M-cast Port No
00001 - 65535
08 Auto Mode Change
01 Auto Mode Change On, Off
02 Hold Time(Err) 20, 30, 40 seconds
09 NTP Setting
01 NTP
On, Off
02 NTP Adrs
0.0.0.0 - 255.255.255.255
03 NTP Port 00001 - 65535
04 Time Zone
UTC –12:00 to +14:00
05 DST
On, Off
06 DST Start Date
1/1 - 12/31
07 DST Start Time 0:00 - 23:00
08 DST End Date
1/1 - 12/31
09 DST End Time
0:00 - 23:00
10 Login Password
01 Admin.Pwd.Login On, Off
02 Admin.Password
Displays password
03 Opr.Pwd.Login
On, Off
04 Opr.Password
Displays password
11 Reset All Dflt.
[2] System Info (
➤
page
61)
Displays current settings
01 Name
02 Serial Number
03 FW Version
04 IP Config Mode
05 IP Address
06 Subnet Mask
07 Gateway Address
08 Mac Address
09 Allow Discovery
10 IP Ctrl Port No
11 IP Ctrl Ntfy
12 Audio Level Ntfy
13 M-cast Adrs
14 M-cast Port No
15 NTP
16 NTP Adrs
17 NTP Port
18 Time Zone
19 CU Link Status
20 CU Link Mode
21 No.ofExtensionCU
22 Total No.of DU
23 Total No.of IU
24 Total No.of INT
[3] Audio Setting (
➤
page
49)
01 MIC/LINE Input 1
01 Input Type Mic, Line +4dBu, Line 0dBV
02 Input Gain
–60dB to –16dB
03 Level
–∞, –120 to +10dB
04 Phantom Power
On, Off
05 Mix to Floor On, Off
02 MIC/LINE Input 2
01 Input Type
Mic, Line +4dBu, Line 0dBV
02 Input Gain
–60dB to –16dB
03 Level –∞, –120 to +10dB
04 Phantom Power
On, Off
05 Mix to Floor
On, Off
03 AUX Input
01 Level –∞, –120 to +10dB
02 Mix to Floor
On, Off
04 DU SP Output Lvl
0 - 20
05 DU Floor Lock
On, Off
06 VoiceDetectSens –5, –4, –3, –2, –1, 0, 1, 2, 3, 4, 5
07 Auto to Mic2 In
On, Off
[4] Recorder Setting (
➤
page
60)
01 Rec Format
WAV, MP3
02 RecordingQuality 64, 128, 192, 256, 320kbps
03 No.of Rec CH
1 to 4 (WAV), 1 to 2 (MP3)
04 Rec Source CH1
Floor, Group 0, Group 1,
Group 2, Group 3, Language 1,
Language 2, Language 3,
Remote Lang. 1, Remote Lang. 2,
Mic/Line 1, Mic/Line 2,
Mic/Line 1&2 Mix
05 Rec Source CH2
Floor, Group 0, Group 1,
Group 2, Group 3, Language 1,
Language 2, Language 3,
Remote Lang. 1, Remote Lang. 2,
Mic/Line 1, Mic/Line 2,
Mic/Line 1&2 Mix
06 Rec Source CH3
Floor, Group 0, Group 1,
Group 2, Group 3, Language 1,
Language 2, Language 3,
Remote Lang. 1, Remote Lang. 2,
Mic/Line 1, Mic/Line 2,
Mic/Line 1&2 Mix
07 Rec Source CH4
Floor, Group 0, Group 1,
Group 2, Group 3, Language 1,
Language 2, Language 3,
Remote Lang. 1, Remote Lang. 2,
Mic/Line 1, Mic/Line 2,
Mic/Line 1&2 Mix
08 Auto Track
Off, 15, 30 min, 1, 2 hour
09 Filename Prefix
Displays filename prefix
[5] Conference Mode
(
➤
page 52)
01 Conference Mode
Free Talk, Request Talk, Full
Remote
02 NOM 1 to 10
03 Auto Mic Off
5 to 60sec ,Off
04 Override Mode
No Override, FIFO, LIFO
(depending on Conference
Mode)
05 Max Queue
0-150