44
Menu item
①
([System Settings])
The setting values and default setting of each item which you can set from [System Settings] are as follows.
The item names with
on the left are the names displayed on the CU display.
Items with are included in the preset settings.
General Settings ([General])
Item name
Description and setting values (default settings are shown in
bold
)
Device Name
Name
Displays the name of the unit being controlled via Web Remote.
ATUC‑50CU
CU Link Settings
Link Port Setting
Link Port Set
Switch the terminal setting between CU LINK A/B terminals and DU CHAIN C/D terminals.
CU A/B
, DU C/D
Primary/Extension
CU Link Mode
Set the dependency relationship of each CU (Primary/Extension) when multiple CUs are cascade-
connected.
Primary
, Extension Pass Through, Extension Last Unit
NOTICE
• When using only one CU without a CU Link connection, be sure to set [CU Link
Setting] to [Primary]. If [CU Link Setting] is set to [Extension], we do not assume
responsibility for any unexpected consequences that may occur.
CU Display/LED
Error Notification
CU Error Notice
Set whether to get error notices on the CU's display.
On
, Off
Network Settings ([Network])
• After changing the network setting item(s), restart the CU to enable the setting values.
Item name
Description and setting values (default settings are shown in
bold
)
IP Settings
IP Config Mode
Specify the IP address-acquiring method.
Auto
: IP address is assigned by a DHCP server or the like.
Static: Specify static IP address. This enables you to specify the IP address, subnet mask, and
gateway address.
IP Address
Displays the IP address.
Does not display when [IP Config Mode] is set to [Auto].
Subnet Mask
Displays the subnet mask.
Does not display when [IP Config Mode] is set to [Auto].
Gateway Address
Displays the gateway address.
Does not display when [IP Config Mode] is set to [Auto].
Allow Discovery
Enable/disable automatic detection from “Locate”.
On
, Off
IP Control Settings
Port Number
IP Ctrl Port No
Displays the IP control port number.
00001-65535 (
17300
)
Notification
IP Ctrl Ntfy
Enable/disable notification from the device during IP control.
On,
Off
Audio Level Notification
Audio Level Ntfy
Enable/disable notification of the audio level from the device when IP control is enabled.
On,
Off
