Audio Technica ATLK-EXT165, Instruction Manual

Page: 9 / 81

9
Part Names and Functions
ATUC-50CU
Front panel
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑩ ⑪ ⑫ ⑨
① Power switch
Turns the power of the CU on and off.
②
USB terminal
The following operations can be performed by connecting a USB
device (mass storage device) such as a USB flash drive or USB
hard drive.
• Recording sound (
➤
page 65)
• Playing buzzer and chime (
➤
page 65)
• Importing/exporting preset data (
➤
page 61)
• Upgrading the firmware (
➤
page 46)
NOTICE • Supports FAT16 and FAT32 file systems
• Maximum storage capacity: 2TB
• Maximum file size: 2GB
• Does not support USB hubs.
• Do not use extension cables.
• Do not attempt to use USB devices (mass storage
devices) that have been cracked, deformed or repaired
using adhesive tape or the like.
• Do not save or create any files or folders unnecessary for
this system on the USB device (mass storage device);
doing so may affect system operations.
• The CU is not compatible with USB devices (mass
storage device) with special functions such as a security
function.
③
USB access indicator
Indicates the connection status of the USB device (mass storage
device).
• In an access state: lit green
NOTICE • Do not remove the USB device (mass storage device)
while the indicator is lit green; doing so may destroy
data.
④ REC (recording) indicator
Indicates the recording status.
• In a recording state: lit green
• In a recording-pause state: blinks green
• While not recording: remains off
NOTICE • If you remove the USB device (mass storage device)
while in a recording state or recording-pause state, the
recorded file may not be written correctly. Do not
remove the USB device (mass storage device) during
recording.
⑤
DU POWER (DU power supply) indicator
• In a normal state: lit green
• In an abnormal state (such as when a voltage drop occurs in the
48V output system): blinks green
• In a DU/INT disconnected state: remains off
⑥ DU CHAIN indicator
• In a normal state: lit green
• In an abnormal state (such as when failing in communication
with a DU): blinks green
• In a DU/INT disconnected state: remains off
⑦
CU LINK indicator
• In a CU Link state: lit green
• In an abnormal state (such as when failing in communication
with a CU): blinks green
• In a CU Link cut-off state: remains off
⑧ Remote (remote control) indicator
• In a communication state: lit green
• In an abnormal state (such as when failing in external
transmission retry): blinks green
• In a non-communication state: remains off
⑨ SIGNAL/PEAK indicator
Indicates the audio signal level as follows:
– 60dBFS or higher: lit green
– 20dBFS or higher: lit amber
– 2dBFS or higher: lit red
Adjust the audio signal level such that the indicator will not light
red (
➤
page 65).
⑩
CU display
⑪ BACK button
Returns to the previous or upper screen/item.
Press and hold this button to return to the HOME screen from
any screen.