How to Use
English
Pass the cable around the back of your neck. As shown
in the figure on the right, check the L/R symbols with the
bush facing upwards and fit the headphones onto your ears.
Adjust the flexible ear hangers to fit around the back of your
ears after fitting the headphones for a stable, comfortable fit.
How to Wear
10
*Do not bend the flexible ear hangers more than necessary at this time.
Failure to observe this caution could cause malfunction.
■
Cable slider
Pass the cable around the back of your neck, and slide the cable slider
to the bottom of your neck to loosely hold the cable in place.
Two types of earpiece are provided with these headphones. Check the
features of each type and use according to the conditions where you are
using the headphones.
Bush
Headphones
Cable slider
■
2 Types of Earpiece
* For details on how to replace earpieces, see "About the earpieces" -> "Replacing the earpieces".
* These earpieces are designed so that external sounds are
easier to hear, but please be careful of the surrounding
environment when using outdoors.
Standard earpieces that seal tightly
and prevent sound leak.
Fine fit earpiece
Active fit earpiece
Earpieces designed with an uneven
surface to allow external sounds
to be heard easily.
*
1
2
Play and enjoy music according to the operation manual of the
Bluetooth
device
connected. The following operations are available on the headphones:
Listening to Music
Play/Pause
Short
press
Control button
Short press
Long press*
Volume Up
The volume turns up by one
level. **
+
button
Forward
Forwards to the next track.
Short press
Long press*
Volume Down
The volume turns down by one
level. **
-
button
Rewind
Returns to the previous track.
Volume button
* 1 Press and hold for approximately 1 second, then release when
you hear the sound of a short beep.
** You will hear a short "beep" when the volume reaches its maximum/minimum.
Plays or pauses music and video.
+
button
-
button
To connect for the first time, refer to ”How to Connect”and pair the headphones with a
Bluetooth
device and connect.
Once pairing has been performed, turn on the headphones and turn on the
Bluetooth
connection of the
Bluetooth
device.
