background image

3

For customers in the USA
FCC Notice

Warning

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation.

Caution

You are cautioned that any changes or modifications not 
expressly approved in this manual could void your authority 
to operate this equipment.

Note: 

This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 
15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more 
of the following measures:

 

– Reorient or relocate the receiving antenna.

 

– Increase the separation between the equipment and receiver.

 

– Connect the equipment to an outlet on a circuit different from 

that to which the receiver is connected.

 

– Consult the dealer or an experienced radio/TV technician for help.

Contact:

Responsible Company: Audio-Technica U.S., Inc.
Address: 1221 Commerce Drive, Stow, Ohio 44224, USA
Tel: 330-686-2600

RF Exposure Statement

This transmitter must not be co-located or operated in 
conjunction with any other antenna or transmitter used in 
other systems. This device complies with FCC radiation 
exposure limits set forth for an uncontrolled environment and 
meets the FCC radio frequency (RF) Exposure Guidelines. 
This equipment has very low levels of RF energy that is 
deemed to comply without testing of specific absorption rate 
(SAR).

For customers in Canada
IC statement

CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada's licence-exempt 
RSSs. Operation is subject to the following two conditions: 
(1) This device may not cause interference; and (2) This 
device must accept any interference, including interference 
that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter 
may only operate using an antenna of a type and maximum 
(or lesser) gain approved for the transmitter by Industry 
Canada. To reduce potential radio interference to other users, 
the antenna type and its gain should be so chosen that the 
equivalent isotropically radiated power (e.i.r.p.) is not more 
than that necessary for successful communication.
This device complies with RSS-102 radiation exposure limits 
set forth for an uncontrolled environment.

Safety precautions

Cautions for rechargeable battery

The headphones are equipped with a rechargeable battery (lithium ion battery).
The charging case is equipped with a rechargeable battery (lithium polymer battery).

 

• If battery fluid gets into eyes, do not rub them. Rinse thoroughly with 

clean water such as tap water and consult a doctor immediately.

 

• If battery fluid leaks, do not touch fluid with bare hands. If fluid 

remains inside the product, it may cause malfunction. If battery 
fluid leaks, contact your local Audio-Technica dealer.

 

– If fluid gets in your mouth, gargle thoroughly with clean water 

such as tap water and consult a doctor immediately.

 

– If your skin or clothing comes in contact with fluid, 

immediately wash the affected skin or clothing with water. If 
you experience skin irritation, consult a doctor.

 

• To avoid leakage, generation of heat or explosion:

 

– Never heat, disassemble or modify the battery, nor dispose of 

it in a fire.

 

– Do not attempt to pierce with a nail, hit with a hammer or 

step on the battery.

 

– Do not drop the product or subject it to strong impact.

 

– Do not get the battery wet.

 

• Do not use, leave or store the battery in the following places:

 

– Area exposed to direct sunlight or high temperatures and 

humidity

 

– Inside of a car under the blazing sun

 

– Near heat sources such as heat registers

 

• Charge only with the included USB cable to avoid malfunction 

or fire.

 

• The internal rechargeable battery of this product cannot be 

replaced by the user. The battery may have reached the end of its 
service life if the usage time becomes significantly shorter even 
after the battery has been fully charged. If this is the case, the 
battery needs to be repaired. Contact your local Audio-Technica 
dealer for repair details.

 

• When the product is disposed of, the built-in rechargeable battery 

needs to be discarded properly. Contact your local Audio-Technica 
dealer to learn how to properly dispose of the battery.

Summary of Contents for ATH-ANC300TW
























Reviews: