Audio Technica AT2020USB-X, User Manual

Page: 47 / 56

46
Connecting and using the headphones
You can monitor sounds being recorded by connecting headphones to the headphone jack. Also, you can directly
monitor your own voice from the product while listening to a sound source from your computer.
1
Connect the headphones to the headphone jack.
2
Turn the headphone level control dial to adjust the volume.
Note
• The headphone level control dial adjusts the volume of the headphone output; it does not adjust the
microphone level.
Using the mix control dial
The product allows you to directly monitor your own voice from the product while listening to a sound source from your
computer. You can use the mix control dial to adjust the balance of the volume level of the sound source stored on the
computer and the monitored volume level of the audio being input.
➊
Turning the dial toward the microphone side increases the monitored volume level of the audio being input.
➋
Turning the dial toward the computer side increases the volume level of the sound source stored on the computer.