Audio Resource Group ARG-OM-003, Manual & User Manual

Page: 2 / 4

Audio Resource Group, Inc.
Page 1
www.argaudio.com
2.4GHz AUDIO RECEIVER MANUAL
Audio Resource Group
Š
440 Ramsland Ave
Š
P.O. Box 39
Š
Hannaford, ND 58448
Š
888.468.4552
Š
©2012 Audio Resource Group, Inc.
Š
All Rights Reserved
Š
ARG-OM-003
2.4 GHz Receiver Diagram
2.4GHz Receiver Line Input Displays
D-1 Display: Standby
D-2 Display: Working
D-3 Display: Mute
1. Display
2. Channel Up Buon
3. Channel Down Buon
4. Volume Up Buon
5. Volume Down Buon
6. Mute Buon
7. C-SAFE Port
8. Auto Power On/O and 3.5mm Stereo Audio Jack
9. Channel Number
10. Volume Number
MOUNTING INSTRUCTIONS:
The ARG 2.4GHz Receiver is a universal unit designed to be compable with most makes and models of
cardio equipment. To mount the Receiver:
1. Determine the appropriate locaon to mount the receiver to the cardio equipment. Take note the
range of moon of the components of machine and make sure the placement of the receiver and
its cabling will not interfere with operaon of the machine or any safety features.
2. Slide the cable es through the appropriate holes in the mounng cleat on the underside of the
receiver. (Top to boom if you are mounng it to a horizontal bar or side to side if you are
mounng to a vercal bar.)
3. Wrap and thread the cable es around the bar on the cardio machine at the pre-determined
locaon. Pull the es ghtly around the bar so the receiver does not move or rotate. Be careful
not to over-ghten the es to avoid cracking the mounng cleat or receiver case. Trim o the
excess ends of the cable es.
4. Connect the power cable to the receiver. The receiver can be powered by either a C-SAFE power
outlet on the cardio machine or an A/C power converter that is plugged into the wall/floor.
(Power adapters and cables are not included and must be ordered separately.) If you are using a
C-SAFE connecon: connect one end of the Cat-5 cable to the C-SAFE port on the cardio machine.
(Check with the equipment manufacturer to make sure the machine has this feature and for
locaon of the outlet.) The other end of the cable connects to the RJ45 receptacle on the back of
the receiver. If you are using an A/C power supply: locate a standard 110V outlet and plug the 12V
A/C adapter side into the outlet and the RJ45 plug into the receptacle on the back of the receiver.
Make sure to route the cord for either opon appropriately to avoid interference with any of the
funcons or safety features of the cardio machine.