11
Start-Up
•
Secure all rear-panel connections
between LS28SE, power amplifier(s) and
input sources.
•
Plug three-prong power cord from
rear of chassis into grounded A.C. wall
outlet. The Power switch defaults to ’off’
when the unit is plugged into a power
receptacle.
•
Press power switch (either on the
remote or front panel). The preamplifier
will begin the warm-up sequence,
which lasts approximately 45 seconds,
during which ‘MUTE’ will flash on the
display. After the warm-up sequence
is complete, the unit will be muted.
Depress the front panel ‘MUTE’ button
or the Mute button on the remote to
initiate normal operation. You may
depress the Mute button prior to the
unit completing the warm-up cycle;
‘MUTE OFF’ will flash on the display until
the warm-up cycle is complete. Select
input source and adjust the volume as
necessary.
Shut-Down
•
Activate ‘MUTE’ function.
•
Turn off power amplifier(s).
•
Press Power switch to ‘off’.
•
Turn off input sources.
Note
The LS28SE should be turned on before
the amplifier in your system. If the LS28SE
is turned on after the amplifier, it will am-
plify any extraneous turn-on noises the
preamplifier or other source components
might generate, which could potentially
damage the loudspeakers. Good oper-
ating practice dictates that the amplifier
should be turned on last, and turned off
first in an audio system.
Break-in
All quality stereo equipment benefits from
a break-in period; during this time, the
various components, wiring and solder
connections change as electrical signals
pass through them. While your LS28SE
will sound fantastic out of the box, it will
only improve with continued use.
Summary of Contents for ARCLS28SE
Page 1: ...H I G H D E F I N I T I O N LS28SE...
Page 2: ...There is only One Reference...
Page 21: ......
