Audio Physic TEMPO plus Owner'S Manual Download Page 18

6. 

Alongside the strength of the bass response, the distance from the side walls also particularly 

 

affects the localisation of sound events and therefore the precision of the spatial imaging. As 

 

the distance from the walls increases, the localisation will become more precise and the sound 

 

will be more balanced. When the loudspeakers are extremely close to the side walls, this will 

 

result in early acoustic reflections, leading to both reduced spatial perception and a rather  

 

nervous sound reproduction. Curtains or shelves or similar at the sides reduce this effect.

Positioning the Loudspeakers
1. 

Once the loudspeakers are positioned parallel to the side walls, turn them inwards until an 

 

imaginary line is pointing from the tweeter of each loudspeaker towards your preferred  

 

listening position. If you prefer to listen to music alone, these imaginary lines coming from the 

 

loudspeakers should ‘intersect‘ at your listening position. This will result in excellent  

 

localisation and spatial imaging. If you would rather listen to music in a group, turn the  

 

loudspeakers further inwards so that the imaginary lines cross in front of the listening position.

       
       
 

2. 

If you prefer a wider soundstage and more generous spatial imaging, position the loudspeakers 

 

at less of an angle so that the imaginary lines cross just behind the listening position. Once a 

 

specific angle has been reached, the spatial image in the centre between the loudspeakers will 

 

begin to lose structure and precision. You can easily identify the ideal angle by using a mono  

 

recording. When the voice of the artist sounds clear again and comes directly from the middle 

 

between the loudspeakers, you have found the ideal position. 

You can find an abundance of further tips and tricks concerning setting up your speakers  
and background information on the topic of listening in the technical area of our website at:  
www.audiophysic.de
 

Second step: Experiment with the angle. 

When it comes to positioning your  

loudspeakers, your listening taste plays an 

important role. To find the ideal position, 

mono recordings are extremely useful,  

particularly those with a singing voice and 

few instruments.

First step: Angle the loudspeakers so that  

an imaginary line is in place between the 

tweeters and your listening position.

English  

  

TEMPO plus

18

Summary of Contents for TEMPO plus





















Reviews: