9
AudioNemesis
M DC1 REV.02 ENG MAR 2007
PROBLEM
POSSIBLE CAUSE
POSSIBLE CAUSE
POSSIBLE CAUSE
POSSIBLE CAUSE
SOLUTION
SOLUTION
SOLUTION
SOLUTION
The appliance does not
turn on
Main voltage is not present,
the power cable is not
properly connected or it is
damaged
Be sure that the turn on switch is in
ON position.
Verify that the power cable is
properly connected and that it’s is in
proper working condition.
There is no output signal
The digital cable is not
properly connected or it is
damaged
Verify that the digital cable is
properly connected and that it’s is in
proper working condition. Turn off
then turn on the appliance.
The LOCK ERROR LED is
flashing
The CD player has the
PAUSE function active, the
disc is damaged or is not
original and the transport
can’t read it
Press PLAY in your CD player, use
original discs
The appliance doe not
work properly, it has
distorsion, it works to
strokes
Main voltage with noise or
incorrect main voltage
Remove the sources of noise or use
stabilizers, verify that the appliance is
connected to the right main voltage
as reported by the rear label (4)
TROUBLE-SHOOTING
For any other problem, please contact your dealer.