7
AudioNemesis
M DC1 REV.02 ENG MAR 2007
1.
1.
1.
1.
Name
Name
Name
Name
AudioNemesis
When the item is ON the name turns ON with a blue light.
2.
2.
2.
2.
On
On
On
On----switch
switch
switch
switch
The on-switch is in the lower part of the chassis, front-right side.
3.
3.
3.
3.
Mains connector
Mains connector
Mains connector
Mains connector
Always connect the power cable with the on-switch turned OFF (on-switch pushed to the rear side of
the chassis)
4.
4.
4.
4.
Mains characteristics
Mains characteristics
Mains characteristics
Mains characteristics
Verify that the data reported on the rear panel of the chassis match the characteristic of the mains
line of your country.
5.
5.
5.
5.
Analogue outputs
Analogue outputs
Analogue outputs
Analogue outputs
Connect the analogue signal cable to this output pins. Then connect the other side of the cable to
your preamplifier or integrated amplifier etc. Be sure that the output characteristics of this unit match
the input characteristic of the unit you want to connect to.
