VSS-401-x Installation and Operation Manual
Document # 540335, Rev IR, 10/2006
Page 9 of 21
3.2 Unpacking and Inspection
3.2.1 Carefully open the packaging and remove the VSS-401-x. Verify
that all components have been included in the package per the
packing list. Inspect the unit for damage. Retain the packing
materials and packing list.
3.2.2 If damage has occurred during shipping, a claim should be filed
with Audio International WITHIN 24 hours and a
Return Request
Authorization Number
shall be obtained from AI by contacting the
Repair Department at 501.801.0640. Repackage the unit in its
original packaging materials and return it to AI following instructions
given by the AI representative. Refer to the front cover of this
manual for address. If no return is necessary, retain the packing
list and the packing materials for storage.
3.3
Cautions and Warnings
3.3.1 It is important to do a pin-to-pin power and ground check on all
connectors. Ensure that power and ground are applied only where
specified. Damage to the unit may result if power or ground is
applied to the wrong points.
3.3.2
DO NOT
connect or disconnect the monitor while power is applied.
3.3.3
DO NOT
remove any factory-installed screws. Damage to the unit
may result and void any warranties.
3.3.4
DO NOT
expose to moisture.
3.3.5
ESD
(Electro Static Discharge) guidelines shall be followed.
