VCP-014-0x-x Installation & Operation Manual
Document #540097, Rev. B, 09/2001
Page
7
of
21
6.2.3 The unit can also be configured for Touch Screen or remote panel
control (i.e. entertainment control panels). The panels are on AI’s
proprietary RS-485 digital data bus system and configured to
control the operational features of the VCP-014-0x-x.
SECTION II – INSTALLATION
1.0
Prior to Installation
1.1
During the design and layout of the aircraft cabin, careful consideration of
the location of this and all other audio/visual modules is necessary. Some
of the items to be considered include:
•
Space
•
Available power supply
•
Environmental conditions (temperature, humidity, etc.)
•
Length of cable runs
•
Location of other aircraft systems (oxygen delivery)
1.2
The VCP-014-0x-x must be installed to conform to the standards
designated by the customer, installing agency, and existing conditions as
to the unit location and type of installation.
1.3
Mounting screws are required to secure the unit. With the exception of the
VCP-014-03-x, the unit must be mounted in a horizontal position (not on
side). Long low-level audio runs may introduce noise into the audio
signal. Refer to Section 6.0 for mounting hole diameters and
configurations.
