Audio International, Inc
.
RCD-201-01-x Installation & Operation Manual
Document # 540225, Rev IR, 01/2001
Page 11 of 18
6.4
The infrared input provides a ground reference connection (-). For
optimum infrared signal transmission, this ground reference connection
should connect along with the chassis ground reference connection (pin 2)
to the same ground termination location as that of the IFR-9A or IFR-485
module being utilized. If this is not possible, then the infrared ground
reference connection for the RCD-201-01-x shall be made within 12" of
the unit.
6.5
Mating Connector Information
Model #
Mating Connector
RCD-201-01-1 RD15F10JVL0
RCD-201-01-2
DAMA-15S
D20418-2 Female Screwlock
Antenna BNC
AMP 413760-8 or equivalent
6.6
Pinout Assignment and Descriptions
Pin #
Description
1
+ 28VDC (Power Input)
2 Ground
3 R+
Audio
Output
4
R- Audio Output
5 L+
Audio
Output
6
L- Audio Output
7 Data
Bus
(A)
8 Data
Bus
(B)
Data Shield to Pin 2
9 Infrared
Input
+
10
Infrared Input -
11
IR Strap 2
12
IR Strap 3
13
IR Strap 4
14
IR Strap Common
15
+12 VDC Battery Holdup Power Input
7.0 Post-Installation Test
7.1
28 VDC power has been connected to the unit. The audio signal
output of the unit is generally connected to cabin speaker systems in
addition to headphone locations. Verify all connections before supplying
power to the unit.
7.2
Load the cassette player with selected material. Use the RCD-201-01-x
front panel controls or the handheld remote control unit to select PLAY.
Verify audio can be heard through the speaker and/or headphone system.
